FCP_FGT_AD-7.4無料過去問、FCP_FGT_AD-7.4受験準備

P.S. Tech4ExamがGoogle Driveで共有している無料かつ新しいFCP_FGT_AD-7.4ダンプ：https://drive.google.com/open?id=1Olcy5iwJ6QHvXge4KxuazDpoVCgvJCA8

調査によると、当社の高く評価されているFCP_FGT_AD-7.4テスト問題の成功は、簡単に操作できる練習システムへの尽力によるものです。候補者から受け取ったフィードバックのほとんどは、FCP_FGT_AD-7.4ガイド急流が優れたプラクティスとシステムを実装しているという事実を示しています。また、当社のFCP_FGT_AD-7.4試験ダンプでは、鮮明な例と正確なチャートを追加して、直面する可能性のある例外的なケースを刺激しています。 FCP_FGT_AD-7.4テストの質問に頼ることができます。成功するために最善を尽くします。

今の競争が激しい社会にあたり、あなたは努力して所有したいことがあります。IT職員にとって、FCP_FGT_AD-7.4試験認定書はあなたの実力を証明できる重要なツールです。だから、Fortinet FCP_FGT_AD-7.4試験に合格する必要があります。それで、弊社の質高いFCP_FGT_AD-7.4試験資料を薦めさせてください。

>> FCP_FGT_AD-7.4無料過去問 <<

高品質なFCP_FGT_AD-7.4無料過去問 & 合格スムーズFCP_FGT_AD-7.4受験準備 | 実際的なFCP_FGT_AD-7.4学習教材

我々にFCP_FGT_AD-7.4参考書を利用したら、大量の時間と精力が必要ではありません。弊社の問題集の的中率が高いので、FCP_FGT_AD-7.4参考書の内容を暗記すれば、試験に無事に合格できます。もし試験の中で内容が変更したら、お客様は半年の全額返金または一年の無料更新を選ぶことができます。FCP_FGT_AD-7.4試験の合格は我々の保証です。

Fortinet FCP_FGT_AD-7.4 認定試験の出題範囲：

トピック	出題範囲
トピック 1	Firewall Policies and Authentication: This topic covers how to set firewall policies, configure SNAT DNAT, implement authentication methods, and deploy FSSO.
トピック 2	VPN: In this section, the focus is on how to configure SSL VPNs for secure network access and implement meshed or redundant IPsec VPNs.
トピック 3	Routing: This section covers how to set up packet routing with static routes and configure SD-WAN for efficient traffic load balancing.
トピック 4	Deployment and System Configuration: This section covers how to set up initial configurations, implement Fortinet Security Fabric, and configure an FGCP HA cluster; diagnose resources and connectivity.
トピック 5	Content Inspection: This section covers how to inspect encrypted traffic, configure inspection modes, apply web filtering, manage applications, set antivirus modes, and implement IPS for security.

Fortinet FCP - FortiGate 7.4 Administrator 認定 FCP_FGT_AD-7.4 試験問題 (Q46-Q51):

質問 # 46
Refer to the exhibit.

Which route will be selected when trying to reach 10.20.30.254?

A. 10.30.20.0/24 [10/0] via 172.20.121.2, port1, [1/0]
B. 10.20.30.0/24 [10/0] via 172.20.167.254, port3, [1/0]
C. 0.0.0.0/0 [10/0] via 172.20.121.2, port1, [1/0]
D. 10.20.30.0/26 [10/0] via 172.20.168.254, port2, [1/0]

正解：B

解説：
The correct route to reach 10.20.30.254 would be:
A. 10.20.30.0/24 [10/0] via 172.20.167.254, port3, [1/0]
This route is more specific (10.20.30.0/24) compared to the other routes (10.20.30.0/26 and
10.30.20.0/24) and would therefore be selected as the best match.

質問 # 47
Refer to the exhibits.
The exhibits show the SSL and authentication policy (Exhibit A) and the security policy (Exhibit B) for Facebook.
Users are given access to the Facebook web application. They can play video content hosted on Facebook, but they are unable to leave reactions on videos or other types of posts.

Which part of the policy configuration must you change to resolve the issue?

A. Make the SSL inspection a deep content inspection.
B. Get the additional application signatures required to add to the security policy.
C. Add Facebook in the URL category in the security policy.
D. Force access to Facebook using the HTTP service.

正解：A

解説：
Needs SSL full inspection.
They can play video (tick) content hosted on Facebook, but they are unable to leave reactions on videos or other types of posts.
This indicate that the rule are partially working as they can watch video but can't react, i.e. liking the content. So, must be an issue with the SSL inspection rather then adding an app rule.
The lock logo behind Facebook_like.Button indicates that SSL Deep Inspection is Required. All other Application Signatures Facebook and Facebook_Video.Play does not require SSL inspection. Hence that the users can play video content. If you look up the Application Signature for Facebook_like.Button it will say "Requires SSL Deep Inspection".
FortiGate needs to perform full SSL inspection. Without full SSL inspection, FortiGate cannot inspect encrypted traffic.

質問 # 48
Refer to the exhibit.

The administrator configured SD-WAN rules and set the FortiGate traffic log page to display SD-WAN-specific columns: SD-WAN Quality and SD-WAN Rule Name.
FortiGate allows the traffic according to policy ID 1. This is the policy that allows SD-WAN traffic.
Despite these settings the traffic logs do not show the name of the SD-WAN rule used to steer those traffic flows.
What can be the reason?

A. SD-WAN rule names do not appear immediately. The administrator needs to refresh the page.
B. FortiGate load balanced the traffic according to the implicit SD-WAN rule.
C. There is no application control profile applied to the firewall policy.
D. Destination in the SD-WAN rules are configured per application but the feature visibility is not enabled.

正解：B

解説：
If the SD-WAN traffic logs do not show the specific SD-WAN rule name, it likely means that FortiGate is using the default or implicit SD-WAN rule to balance traffic. The implicit rule comes into effect when no explicit SD-WAN rule is matched, and as a result, the SD-WAN rule name is not displayed in the logs. The default behavior is to load balance the traffic across available interfaces based on SD-WAN strategy.

質問 # 49
By default, FortiGate is configured to use HTTPS when performing live web filtering with FortiGuard servers.
Which CLI command causes FortiGate to use an unreliable protocol to communicate with FortiGuard servers for live web filtering?

A. set webfilter-force-off disable
B. set protocol tcp
C. set fortiguard-anycast disable
D. set webfilter-cache disable

正解：C

解説：
The CLI command that causes FortiGate to use an unreliable protocol to communicate with FortiGuard servers for live web filtering is:
D: set fortiguard-anycast disable
Disabling FortiGuard Anycast will cause FortiGate to use a direct connection (unreliable protocol) instead of the anycast-based connection for communication with FortiGuard servers. This may be necessary in certain scenarios where anycast is causing issues, and a direct connection is preferred.
By default, FortiGate is configured to enforce the use of HTTPS port 443 to perform live filtering with FortiGuard or FortiManager. Other ports and protocols are available by disabling the FortiGuard anycast setting on the CLI.

質問 # 50
Which statement about the IP authentication header (AH) used by IPsec is true?

A. AH provides data integrity but no encryption.
B. AH does not provide any data integrity or encryption.
C. AH does not support perfect forward secrecy.
D. AH provides strong data integrity but weak encryption.

正解：A

解説：
The answer is C. AH provides data integrity but no encryption.
The correct statement about the IP Authentication Header (AH) used by IPsec is that AH provides data integrity and authentication but does not provide encryption.
"IPsec is a suite of protocols that is used for authenticating and encrypting traffic between two peers.
The three most used protocols in the suite are the following:
- Internet Key Exchange (IKE), which does the handshake, tunnel maintenance, and disconnection.
- Encapsulation Security Payload (ESP), which ensures data integrity and encryption.
- Authentication Header (AH), which offers only data integrity - not encryption."

質問 # 51
......

急速な市場の発展に伴い、学習者が試験の準備に役立つFCP_FGT_AD-7.4ガイド急流を販売する企業やWebサイトが増えています。あなたが以前に知っていたなら、当社の教材が学生やビジネスマンに関係なく候補者に非常に人気があることを見つけることは難しくありません。 FCP_FGT_AD-7.4試験トレントの購入を歓迎します。古いsayingにもあるように、クライアントは神です！サービスが一番です！ FCP_FGT_AD-7.4ガイドBraindumpsは、限られた時間の試験とオンラインエラー修正をシミュレートでき、24時間年中無休のサービスを提供しています。FCP_FGT_AD-7.4試験Torrentは、試験を準備するための最良かつ賢明な選択です。

FCP_FGT_AD-7.4受験準備: https://www.tech4exam.com/FCP_FGT_AD-7.4-pass-shiken.html

P.S.Tech4ExamがGoogle Driveで共有している無料の2025 Fortinet FCP_FGT_AD-7.4ダンプ：https://drive.google.com/open?id=1Olcy5iwJ6QHvXge4KxuazDpoVCgvJCA8

Jay Reed Jay Reed

Biography

FCP_FGT_AD-7.4無料過去問、FCP_FGT_AD-7.4受験準備

高品質なFCP_FGT_AD-7.4無料過去問 & 合格スムーズFCP_FGT_AD-7.4受験準備 | 実際的なFCP_FGT_AD-7.4学習教材

Fortinet FCP_FGT_AD-7.4 認定試験の出題範囲：

Fortinet FCP - FortiGate 7.4 Administrator 認定 FCP_FGT_AD-7.4 試験問題 (Q46-Q51):

Quick Links

Resources